How To Charge Your Meta Quest 2

augustus 13, 2022 Zyber VR

One of the main concerns with VR headsets is battery life. The last thing you want is for your Quest 2 to die in the middle of an intense gaming session. Understanding how to charge your device properly and optimize its charging speed is important.

In this blog, we'll explore some tips and tricks to help you charge your Meta Quest 2 efficiently, ensuring that you get the most out of your VR experience.

Meta Quest 2 Charging Speed

The batteries in the Quest 2 have a capacity of roughly 3,640 mAh. Typically, it takes around 2 to 3 hours to charge the Quest 2 from 0% to 100% using the ZyberVR link cable and a charger.

The charging time of the Quest 2 depends on various factors, including the battery's current state, the charger used, and the charging method. It is recommended to use a high-quality USB-C cable with the Quest 2 like the ZyberVR link cable for optimal charging speed.

Additionally, using the device while charging may slow down the charging speed and it's best to leave the Quest 2 alone while charging to optimize the charging time. It is also important to note that using the device at its highest refresh rate of 120 Hz will drain the battery much more quickly, and may require frequent charging if used extensively.

In such cases, it is recommended to invest in external charging solutions such as the ZyberVR magnetic battery pack, which allows you to use the Quest 2 while playing and extends the device's battery life.

How To Charge Your Meta Quest 2?

The majority of users claim that the headset and controllers have relatively decent battery life, although eventually, you will need to charge them both. While the controllers itself just need a single AA battery to function, the headset itself includes a built-in battery that can be recharged using the USB-C port on the side of the device.

Charging Your Quest 2 Controllers

Connect the small end of the included USB-C cable to the charging port on one of the controllers. The charging port is located at the bottom of the controller, near the wrist strap.
Connect the other end of the cable to a USB port on your computer or a USB wall adapter.
If you are using a USB wall adapter, plug it into a power outlet.
The controller's LED indicator light will turn orange to indicate that the controller is charging.
Leave the controller to charge until the LED indicator light turns white. This may take up to 2 hours for a full charge.
Once the controller is fully charged, disconnect it from the USB cable.
Repeat the same process for the second controller.

Charging Your Quest 2 Headset

Connect the USB-C end of the ZyberVR link cable to the Quest 2 headset. The USB-C port is located on the bottom of the device.
Connect the other end of the ZyberVR link cable to a USB port on your computer or a USB wall adapter.
If you are using a USB wall adapter, plug it into a power outlet.
The headset should display a charging indicator in the form of a battery icon with a lightning bolt in it, located in the top right corner of the headset's display. This indicates that the device is charging.
Leave the device to charge until it reaches a full charge. It is recommended to leave the device charging for at least 2-3 hours to ensure a full charge.
Once the device is fully charged, unplug the ZyberVR link cable from the device and the power source.

How To Extend The Battery Life Of Meta Quest 2?

Purchasing the ZyberVR magnetic battery pack that attaches to the headset is among the good options. Here are some tips to extend the battery life of your Meta Quest 2:

Adjust The Brightness

Lowering the brightness of your Quest 2 can significantly improve battery life. You can do this by going to Settings > Device > Display > Brightness.

Turn Off Bluetooth

If you're not using any Bluetooth devices, such as headphones or controllers, turn off Bluetooth in Settings > Device > Bluetooth. Bluetooth consumes a lot of battery power, and turning it off can improve battery life.

Close Background Apps

Closing background apps that you're not using can help conserve battery life. You can do this by pressing the Oculus button, selecting the app, and then selecting Close.

Limit The Use Of Power-Hungry Apps

Some VR apps are more power-hungry than others. Limit the use of these apps to extend your Quest 2's battery life. You can monitor which apps are using the most power by going to Settings > Device > Battery.

Charge Your Device Before Use

Fully charge your device before using it to ensure you get the most out of your battery. Using your device when the battery is low can also reduce its lifespan.

Use The Power Saving Mode

The Power Saving Mode reduces the performance of the device to conserve battery life. You can turn on this mode by going to Settings > Device > Power Saving Mode.

Invest In A Battery Head Strap

The ZyberVR Battery Head Strap attaches to the back of your Quest 2 headset and provides additional hours of battery life. It is especially beneficial for longer VR sessions where the weight of the headset can become uncomfortable.

Does The Meta Quest 2 Need Charging?

Yes, the Meta Quest 2 needs regular charging. The headset comes with a built-in rechargeable battery while the controllers use AA batteries. To ensure optimal performance and avoid interruptions, keep your device and controllers adequately charged.

How To Know If Meta Quest 2 Is Charging?

When your Meta Quest 2 is charging, you will see a battery icon with a lightning bolt in the top-right corner of the headset's display. Additionally, the LED indicator on the side of the headset will light up. An orange light indicates the device is charging, and a green light shows it is fully charged.

Can I Use My Phone Charger To Charge Meta Quest 2?

You can use a phone charger for your Meta Quest 2 if it meets the required specifications. The charger should be a high-quality USB-C charger with sufficient power output. However, it is recommended to use the charger that comes with the Quest 2 or the ZyberVR link cable for optimal charging speed and safety.

Can You Charge Quest 2 With A Power Bank?

Yes, you can charge your Quest 2 with a power bank if it supports USB-C output and provides sufficient power. This is especially useful for on-the-go charging during extended VR sessions.

Can I Replace Quest 2 Battery?

The Quest 2 headset has a built-in battery that cannot be easily replaced by the user. However, the controllers use replaceable AA batteries. To replace the controller batteries:

Slide the battery cover off the controller.
Insert a new AA battery, ensuring the correct orientation.
Slide the cover back into place.

Meta Quest 2 Charging Accessories:

1. Charging Dock

2. Direct Charge Controller Grips

3. Link Cable

4. Charging Cable

5. Neck Power Bank

Conclusion

Properly charging your Meta Quest 2 and optimizing its battery life are essential for an uninterrupted VR experience. By following these tips and using high-quality accessories like the ZyberVR link cable and battery pack, you can ensure your device is always ready for your next gaming session.

Have you found any other effective methods to extend the battery life of your Quest 2?

Back to Blog